Wall-mounted Installation

Avoid drilling holes into the water pipes and power cables buried in the wall.

1. Combine the SmartLogger and SmartModule.

   If the SmartLogger and SmartModule have been combined before delivery, skip this step.

   Figure 3-4 Connecting the SmartLogger to the SmartModule using a connecting plate
   

2. Install the SmartLogger and SmartModule.
   Figure 3-5 Wall-mounted installation
   

Guide Rail-mounted Installation (Stand-alone)

Prepare a 35 mm standard guide rail by yourself. Ensure that the guide rail:

• Has sufficient length for securing the SmartLogger and SmartModule. The recommended effective length is 360 mm or greater.
• Has been secured before you install the SmartLogger and SmartModule.

  Ensure that the SIM card slot on the SmartLogger is not blocked.

Figure 3-6 Guide rail-mounted installation

Guide Rail-mounted Installation (Combined)

1. Combine the SmartLogger and SmartModule.

   If the SmartLogger and SmartModule have been combined before delivery, you only need to remove the mounting ears and guide rail clamps in the middle. You do not need to use a connecting plate to connect the SmartLogger and SmartModule.

   Figure 3-7 Connecting the SmartLogger to the SmartModule using a connecting plate
   

2. Install the SmartLogger and SmartModule.
   Figure 3-8 Guide rail-mounted installation