Number of solar inverters

• SmartLogger3000A: can connect to a maximum of 80 solar inverters.
• SmartLogger3000B: can connect to a maximum of 150 solar inverters.
• SmartLogger3000C: can connect to a maximum of 80 solar inverters.

Communications mode

RS485, ETH, MBUS (optional), 4G (optional), and SFP (optional)

Maximum communication distance

• RS485: 1000 m
• ETH: 100 m
• MBUS (multi-core cable): 1000 m; MBUS (single-core cable): 400 m (The three-phase cables must be bound at 1 m intervals)

• Optical fiber (single-mode, 1310 nm optical module): 10,000 m (with the 1000M optical module); 12,000 m (with the 100M optical module)

Power adapter

• AC input: 100–240 V, 50/60 Hz
• DC output: 12 V, 2 A

DC power supply

24 V, 0.8 A

Power consumption

• SmartLogger3000A: 8 W (typical)
• SmartLogger3000B: 9 W (typical)
• SmartLogger3000C: 8 W (typical)
• SmartLogger3000B + SmartModule1000A: 10 W (typical)
• 15 W (maximum)

Dimensions (W x H x D)

• 259 mm x 160 mm x 59 mm (including mounting ears)
• 225 mm x 160 mm x 44 mm (excluding mounting ears)

Net weight

2 kg

Operating temperature

–40°C to +60°C

Storage temperature

–40°C to +70°C

Relative humidity

5%–95% RH

IP rating

IP20

Installation mode

Installed on a wall or guide rail

Highest operating altitude

4000 m

Pollution degree

2

Corrosion level

Class B

Ethernet electrical port (WAN and LAN)

2 PCS; 10M/100M/1000M auto-sensing

Ethernet optical port (SFP)

2 PCS; supports 100M/1000M SFP/eSFP optical modules

MBUS port

1 PCS; supports a maximum AC input voltage of 800 V

RS485 (COM) port

3 PCS; supported baud rates: 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s, 19,200 bit/s, and 115,200 bit/s

USB

USB2.0

Output power port

One port; DC output: 12 V, 0.1 A

Digital input (DI)

Four ports; passive dry contact signal access

Digital output (DO)

Two ports; relay dry contact outputs, with NO or NC contacts; 12 V/0.5 A signal voltage

Analog input (AI)

Four ports; AI1: 0–10 V voltage (passive); AI2–AI4: 4–20 mA or 0–20 mA input current (passive)

4G antenna port (4G)

One port; SMA-K (external screw inner hole) port, used with an antenna that has the SMA-J (internal screw inner pin) port

4G/3G/2G

The SmartLogger3000A01CN supports 2G, 3G, and 4G networks of China Mobile and China Unicom as well as 4G networks of China Telecom.

The following frequency bands are supported:

• LTE FDD: B1, B3, B8
• LTE TDD: B38, B39, B40, B41
• WCDMA: B1, B5, B8, B9
• TD-SCDMA: B34, B39
• GSM: 900 MHz/1800 MHz

The SmartLogger3000A01EU and SmartLogger3000A03EU support the following frequency bands:

• LTE FDD: B1, B3, B7, B8, B20
• LTE TDD: B38, B40
• WCDMA: B1, B5, B8
• GSM: 900 MHz/1800 MHz

SmartLogger3000A01NH: Supports 3G/4G of Docomo and SoftBank.

The following frequency bands are supported:

• LTE FDD: B1, B3, B8, B18, B19, B26 (only Tokyo, Nagoya, and Osaka support B3)
• LTE TDD: B41
• WCDMA: B1, B6, B8, B19

The SmartLogger3000A01KR supports networks of SK Telecom.

The following frequency bands are supported:

• LTE FDD: B1, B3, B5, B7
• WCDMA: B1

The SmartLogger3000A01AU supports the following frequency bands:

• LTE FDD: B1, B2, B3, B4, B5, B7, B8, B28
• LTE TDD: B40
• WCDMA: B1, B2, B5, B8
• GSM: 850 MHz/900 MHz/1800 MHz/1900 MHz

The SmartLogger3000C01 supports the following frequency bands:

• LTE FDD: B1, B3, B7, B8, B20
• LTE TDD: B38, B40
• WCDMA: B1, B5, B8
• GSM: 900 MHz/1800 MHz

WLAN (local maintenance using app)

2.4G

WCDMA Band 1

1920–1980 MHz

2110–2170 MHz

WCDMA Band 5

824–849 MHz

869–894 MHz

WCDMA Band 8

880–915 MHz

925–960 MHz

GSM 900

880–915 MHz

925–960 MHz

GSM 1800

1710–1785 MHz

1805–1880 MHz

LTE Band 1

1920–1980 MHz

2110–2170 MHz

LTE Band 3

1710–1785 MHz

1805–1880 MHz

LTE Band 5

824–849 MHz

869–894 MHz

LTE Band 7

2500–2570 MHz

2620–2690 MHz

LTE Band 8

880–915 MHz

925–960 MHz

LTE Band 20

832–862 MHz

791–821 MHz

LTE Band 38

2570–2620 MHz

LTE Band 40

2300–2400 MHz

GSM 900

GMSK (1Tx Slot)

33

±2

8PSK (1Tx Slot)

27

±3

GSM 1800

GMSK (1Tx Slot)

30

±2

8PSK (1Tx Slot)

26

±3

WCDMA Band 1

24

+1/–3

WCDMA Band 5

24

+1/–3

WCDMA Band 8

24

+1/–3

LTE Band 1

23

±2

LTE Band 3

23

±2

LTE Band 5

23

±2

LTE Band 7

23

±2

LTE Band 8

23

±2

LTE Band 20

23

±2

LTE Band 38

23

±2

LTE Band 40

23

±2

Frequency band

2.4 GHz: 2.4–2.4835 GHz

Gain

2.4 GHz: 2.85 dBi

Transmit power

2.4 GHz: 1 x 100 mW

Maximum throughput

2.4 GHz: 65 Mbit/s

Single/Dual band mode

Single

MIMO

2.4 GHz frequency band: 1T1R

Maximum number of online users

6

Polarization mode

Linear

Directivity

Multi-dimensional

Protocol standard

802.11b/g/n

Bandwidth

20 MHz

Maximum transmit power

≤ 20 dBm EIRP