No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
NetEngine AR V300R019 CLI-based Configuration Guide - Interface Management
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Manually Configuring Frequency Bands

(Optional) Manually Configuring Frequency Bands

Context

The networks of network carriers can provide multiple frequency bands for user access. When the frequency band of a network changes after cellular interfaces are connected to the network, the 5G data card automatically adjusts the frequency band accordingly, which affects stability of links.

When the frequency band of a network that you access is fixed, you can set the frequency band of the network that cellular interfaces are connected to. This prevents frequency band changes caused by frequency interference and ensures link stability.

Procedure

  • Manually configuring the frequency band of a WCDMA network
    1. Run system-view

      The system view is displayed.

    2. Run interface cellular interface-number

      The LTE cellular interface view is displayed.

    3. Run band wcdma { wcdma1900 | wcdma2100 | wcdma850 | wcdma900 | AWS | wcdma1700 | wcdma1800 }*

      The frequency band of the WCDMA network that LTE cellular interfaces are connected to is manually configured.

      By default, LTE cellular interfaces automatically select a frequency band to connect to the WCDMA network.

  • Manually configuring the frequency band of an LTE network
    1. Run system-view

      The system view is displayed.

    2. Run interface cellular interface-number

      The LTE cellular interface view is displayed.

    3. Run band lte { band1 | band2 | band3 | band4 | band5 | band7 | band8 | band12 | band13 | band17 | band18 | band19 | band20 | band26 | band28 | band32 | band34 | band38 | band39 | band40 | band41 }*

      The frequency band of the LTE network that LTE cellular interfaces are connected to is manually configured.

      By default, LTE cellular interfaces automatically select a frequency band to connect to the LTE network.

  • Manually configuring the frequency band of an NR network
    1. Run system-view

      The system view is displayed.

    2. Run interface cellular interface-number

      The 5G cellular interface view is displayed.

    3. Run band nr { n1 | n3 | n28 | n41 | n77 | n78 | n79 } *

      The frequency band of the NR network that cellular interfaces are connected to is manually configured.

      By default, cellular interfaces automatically select a frequency band to connect to the NR network.

      This function is supported only in V300R019C11SPC100 and later versions.

Translation
简体中文
Download
Updated: 2023-05-18

Document ID: EDOC1100112349

Views: 438546

Downloads: 931

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :